[Free] 2017(Jan) EnsurePass Dumpsleader IBM C2180-410 Dumps with VCE and PDF 11-20

EnsurePass
2017 Jan IBM Official New Released C2180-410
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/C2180-410.html

IBM MQ V8.0, System Administration

Question No: 11

An application needs to clear a local queue using PCF commands. The application is getting reason code 2035 MQRC_NOT_AUTHORIZED. Channel authentication records are disabled.

What are the minimum required permissions a system administrator needs to assign to the application users?

  1. All authority to the queue manager object.

  2. A blank MCAUSER in the server connection channel.

  3. Connect authority to the queue manager object and Clear authority to the queue.

  4. Connect and Control authority to the queue manager object and ALL MQI authority to the queue.

    Answer: B

    Reference:

    http://www- 01.ibm.com/support/knowledgecenter/SSFKSJ_7.1.0/com.ibm.mq.doc/cs11910_.htm

    Question No: 12

    A system administrator needs to ensure IBM MQ is at the Fix Pack 8.0.0.2 level.

    1. What command should the system administrator use to find out the current version of

      IBM MQ?

    2. If the current IBM MQ version is 8.0.0.0, which Fix Pack(s) need to be installed to upgrade it to 8.0.0.2?

      1. a. dspmq

B. 8.0.0.2

C. a. dspmqver

D. 8.0.0.2

E. a. mqver

F. 8.0.0.1 and 8.0.0.2

G. a. dspmqver

H. 8.0.0.1 and 8.0.0.2

Answer: B

Question No: 13

An application connects to local queue manager QM1 and puts messages on remote queue QR1. QR1 has been defined with target queue QL2, target queue manager QM2, and XMITQ QM2.

QL2 is defined as a local queue in QM2. For security purposes, another queue manager, QM3, has been created behind a firewall and all messages destined for QL2 on QM2 need to be routed to QL3 on QM3.

Assuming QM2 and QM3 are interconnected, what changes does the system administrator need to make to achieve this without application failure?

  1. Create an alias queue on QM2 pointing to QL3 on QM3.

  2. Create a remote queue on QM2 pointing to QL3 on QM3.

  3. Alter the QR1 RQMNAME parameter to point to QM3 and RNAME parameter to QL3 with XMITQ QM2.

  4. Alter the QR1 RQMNAME parameter to point to QM3 and RNAME parameter to QL3 with XMITQ QM3.

Answer: B

Reference:

http://www.ibm.com/developerworks/websphere/library/techarticles/1212_bhat/1212_bhat.h tml

Question No: 14

On a Linux system, a system administrator needs to change the default queue manager from QM1 to a newly created queue manager QM2.

How can the system administrator do this?

  1. Re-create QM2 with the -d option.

  2. Use theALTER QMGRcommand.

  3. Edit the DefaultQueueManager stanza in qm.ini replacing QM1 with QM2.

  4. Change the queue manager name on the Name attribute of the DefaultQueueManager stanza to QM2 in mqs.ini.

Answer: D

Reference:

http://www- 01.ibm.com/support/knowledgecenter/nl/en/SSFKSJ_7.5.0/com.ibm.mq.con.doc/q015220_. htm

Question No: 15

IBM MQ V7.0.1.3 is running on a server.

A system administrator receives request to install IBM MQ V8.0 as a second installation on a server where IBM MQ V7.0.1.3 is running. Both the product versions need to co-exist.

What should the system administrator dofirstto ensure both versions will run without impacting each other?

  1. Upgrade IBM MQ V7.0.1.3 to 7.0.1.6.

  2. Define a separate installation name.

  3. Define a new data directory for IBM MQ V8.0.

  4. Set up environment variables to have both product versions installed in the same path.

Answer: D

Reference:

http://www-01.ibm.com/software/integration/wmq/library/

Question No: 16

A system administrator needs to ensure that the users of a particular SVRCONN channel provide a user ID and password while other SVRCONN channels may continue to work unauthenticated.

How can the system administrator do this?

  1. Set CHCKCLNT(NONE) for the AUTHINFO and CHCKCLNT(ASQMGR) for the channel CHLAUTH rule.

  2. Set CHCKCLNT(REQUIRED) for the AUTHINFO and CHCKCLNT(ASQMGR) for the channel CHLAUTH rule.

  3. Set CHCKCLNT(REQUIRED) for the AUTHINFO and CHCKCLNT(REQUIRED) for the channel CHLAUTH rule.

  4. Set CHCKCLNT(OPTIONAL) for the AUTHINFO and CHCKCLNT(REQUIRED) for the channel CHLAUTH rule.

Answer: C

Reference:

http://www- 01.ibm.com/support/knowledgecenter/SSFKSJ_8.0.0/com.ibm.mq.sec.doc/q113250_.htm?l ang=en

Question No: 17

A user reports that the message was put to queue QUEUE1, but an application receives MQRC_NO_MSG_AVAILABLE when it tries to get the message.

Which command can the system administrator use to check both the current depth of QUEUE1 and whether there are uncommitted messages?

  1. DISPLAY QUEUE (QUEUE1) ALL

  2. DISPLAY THREAD (*) TYPE (INDOUBT)

  3. DISPLAY QSTATUS (QUEUE1) TYPE (QUEUE) ALL

  4. DISPLAY QSTATUS (QUEUE1) TYPE (HANDLE) ALL

Answer: B

Question No: 18

An application puts a batch of messages onto a local queue for processing multiple times during the day. The system administrator needs to determine the size of the messages put to the queue.

What type of monitoring does the system administrator need to enable and which value needs to be reviewed by the system administrator that indicates the size of the messages put?

  1. Enable queue accounting on the queue and review the PutBytes value.

  2. Enable queue statistics on the queue and review the PutMaxBytes value

  3. Enable queue statistics on the queue manager and review the MaxMsgLength.

  4. Configure application event monitoring on the queue and review the MaxMsgLength.

Answer: C

Reference:

http://www- 01.ibm.com/support/knowledgecenter/SSFKSJ_7.5.0/com.ibm.mq.ref.adm.doc/q087000_.h tm

Question No: 19

For a queue manager with CHLAUTH(DISABLED), the AUTHINFO has been defined as follows:

DEFINE AUTHINFO (‘CHECK.PWD’) AUTHTYPE (IDPWOS) CHCKCLNT (REQUIRED) ADOPTCTX (NO)

A developer tried to test the connection by setting the MQSAMP_USER_ID to 鈥渦ser1鈥?setting the MQSERVER environment variable, and running theamqsputcsample program. The developer logon ID, 鈥渦ser2鈥? has no access to the queue manager, but 鈥渦ser1鈥?has all the required access.

When the developer ranamqsputc,it prompted for a password. The developer provided a valid password for 鈥渦ser1鈥? butamqsputcfailed with the MQRC_NOT_AUTHORIZED 2035 reason code.

What did the system administrator identify as the cause for the 2035 reason code?

  1. 鈥渦ser1鈥?is not defined in LDAP.

  2. 鈥渦ser1鈥?does not have access to the channel.

  3. 鈥渦ser2鈥?does not have access to the MQ objects.

  4. The password for 鈥渦ser2鈥?must be provided whenamqsputcprompted for a password.

Answer: B

Question No: 20

A system administrator migrated IBM MQ for z/OS from V7.1 to V8.0.

What operation mode allows the system administrator to backward migrate an existing queue manager?

  1. OPMODE = (COMPAT, 7.1)

  2. OPMODE = (COMPAT, 710)

  3. OPMODE = (NEWFUNC, 7.1.0)

  4. OPMODE = (NEWFUNC, 800)

Answer: B

100% Free Download!
Download Free Demo:C2180-410 Demo PDF
100% Pass Guaranteed!
Download 2017 EnsurePass C2180-410 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE

Leave a Reply