[Free] 2017(July) EnsurePass Examcollection Cisco 200-120 Dumps with VCE and PDF 181-190

EnsurePass
2017 July Cisco Official New Released 200-120
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/200-120.html

CCNA Cisco Certified Network Associate CCNA

Question No: 181 – (Topic 4)

A router has learned three possible routes that could be used to reach a destination network. One route is from EIGRP and has a composite metric of 20514560. Another route is from OSPF with a metric of 782. The last is from RIPv2 and has a metric of 4. Which route or routes will the router install in the routing table?

  1. the OSPF route

  2. the EIGRP route

  3. the RIPv2 route

  4. all three routes

  5. the OSPF and RIPv2 routes

Answer: B

Question No: 182 – (Topic 4)

Refer to the exhibit.

image

Why is flash memory erased prior to upgrading the IOS image from the TFTP server?

  1. The router cannot verify that the Cisco IOS image currently in flash is valid.

  2. Flash memory on Cisco routers can contain only a single IOS image.

  3. Erasing current flash content is requested during the copy dialog.

  4. In order for the router to use the new image as the default, it must be the only IOS image in flash.

Answer: C

Question No: 183 – (Topic 4)

Refer to the exhibit.

image

The speed of all serial links is E1 and the speed of all Ethernet links is 100 Mb/s. A static route will be established on the Manchester router to direct traffic toward the Internet over the most direct path available. What configuration on the Manchester router will establish a route toward the Internet for traffic that originates from workstations on the Manchester LAN?

A. ip route 0.0.0.0 255.255.255.0 172.16.100.2

B. ip route 0.0.0.0 0.0.0.0 128.107.1.1

C. ip route 0.0.0.0 255.255.255.252 128.107.1.1

D. ip route 0.0.0.0 0.0.0.0 172.16.100.1

E. ip route 0.0.0.0 0.0.0.0 172.16.100.2

F. ip route 0.0.0.0 255.255.255.255 172.16.100.2

Answer: E

Question No: 184 – (Topic 4)

What command sequence will configure a router to run OSPF and add network 10.1.1.0

/24 to area 0?

  1. router ospf area 0

    network 10.1.1.0 255.255.255.0 area 0

  2. router ospf

    network 10.1.1.0 0.0.0.255

  3. router ospf 1

    network 10.1.1.0 0.0.0.255 area 0

  4. router ospf area 0

    network 10.1.1.0 0.0.0.255 area 0

  5. router ospf

    network 10.1.1.0 255.255.255.0 area 0

  6. router ospf 1

network 10.1.1.0 0.0.0.255

Answer: C

Question No: 185 – (Topic 4)

A network administrator is troubleshooting an EIGRP problem on a router and needs to confirm the IP addresses of the devices with which the router has established adjacency. The retransmit interval and the queue counts for the adjacent routers also need to be checked. What command will display the required information?

  1. Router# show ip eigrp adjacency

  2. Router# show ip eigrp topology

  3. Router# show ip eigrp interfaces

  4. Router# show ip eigrp neighbors

Answer: D

Question No: 186 DRAG DROP – (Topic 4)

image

Answer:

image

Question No: 187 – (Topic 4)

Refer to the exhibit.

image

According to the routing table, where will the router send a packet destined for 10.1.5.65?

A. 10.1.1.2

B. 10.1.2.2

C. 10.1.3.3

D. 10.1.4.4

Answer: C

Question No: 188 – (Topic 4)

Refer to the exhibit.

image

Which address and mask combination represents a summary of the routes learned by EIGRP?

A. 192.168.25.0 255.255.255.240

B. 192.168.25.0 255.255.255.252

C. 192.168.25.16 255.255.255.240

D. 192.168.25.16 255.255.255.252

E. 192.168.25.28 255.255.255.240

F. 192.168.25.28 255.255.255.252

Answer: C

Question No: 189 – (Topic 4)

Refer to the exhibit.

image

Given the output for this command, if the router ID has not been manually set, what router ID will OSPF use for this router?

A. 10.1.1.2

B. 10.154.154.1

C. 172.16.5.1

D. 192.168.5.3

Answer: C

Question No: 190 – (Topic 4)

What is a global command?

  1. a command that is set once and affects the entire router

  2. a command that is implemented in all foreign and domestic IOS versions

  3. a command that is universal in application and supports all protocols

  4. a command that is available in every release of IOS, regardless of the version or deployment status

  5. a command that can be entered in any configuration mode

Answer: A

100% Free Download!
Download Free Demo:200-120 Demo PDF
100% Pass Guaranteed!
Download 2017 EnsurePass 200-120 Full Exam PDF and VCE
Get 10% off your purchase! Copy it:TJDN-947R-9CCD [2017.07.01-2017.07.31]

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE

Leave a Reply