[Free] 2018(June) Ensurepass CompTIA RC0-N06 Dumps with VCE and PDF 231-240

Ensurepass.com : Ensure you pass the IT Exams
2018 May CompTIA Official New Released RC0-N06
100% Free Download! 100% Pass Guaranteed!

CompTIA Network Recertification Exam for Continuing Education

Question No: 231 – (Topic 6)

A network technician is selection the best way to protect a branch office from as many different threat from the Internet as possible using a single device. Which of the following actions would meet the objective?

  1. Configure a network-based firewall.

  2. Configure a firewall with UTM.

  3. Configure a host-based firewall.

Answer: A

Question No: 232 – (Topic 6)

A company utilizes a patching server to regularly update their PC#39;s. After the latest round of patching all of the older PCs with non-gigabit Ethernet cards become disconnected from the network and now require a technician to fix the issue locally at each PC. Which of the following should be done to prevent this issue in the future?

  1. Enable automatic rebooting of the pCs after patching is completed

  2. Require the patching server to update the oldest PCs off hours

  3. Disable automatic driver updates to PCs on the patching server

  4. Throttle the connection speed of the patching server to match older PCs

Answer: D

Question No: 233 – (Topic 6)

A technician who is working with a junior member of the team is called away for another issue. The junior technician orders an SC 80/125 fiber cable instead of an ST 80/125.

Which of the following will MOST likely be an issue with the new cable?

  1. Wavelength mismatch

  2. Distance limitations

  3. Connector mismatch

  4. Attenuation/Db loss:

Answer: C

Question No: 234 – (Topic 6)

A technician is dispatched to investigate sporadic network outages. After looking at the event logs of the network equipment, the technician finds that all of the equipment is restarting at the same time every day. Which of the following can the technician deploy to correct this issue?

  1. Grounding bar

  2. Rack monitoring

  3. UPS

  4. Air flow management

  5. Surge protector

Answer: C

Question No: 235 – (Topic 6)

Upon arrival at work, an administrator is informed that network users cannot access the file server. The administrator logs onto the server and sees the updates were automatically installed and the network connection shows limited and no availability. Which of the following needs to be rolled back?

  1. The browser on the server

  2. The server#39;s NIC drivers

  3. The server#39;s IP address

  4. The antivirus updates

Answer: B

Question No: 236 – (Topic 6)

A network technician has downloaded the latest vendor switch O/S. which includes new features and enhancements. Which of the following should the technician perform FIRST when updating the switches?

  1. Backup the current configuration for each switch

  2. Install during non-business hours to test the system

  3. Test the O/S on one of the production switches

  4. Power cycle the company#39;s border router

Answer: A Explanation:

QUESTIONNO: 297

Which of the following protocols is used to send mail to another server on the Internet?

  1. RTP

  2. SNMP

  3. POP

  4. SMTP Answer: D

Question No: 237 – (Topic 6)

A new threat is hiding traffic by sending TLS-encrypted traffic outbound over random ports. Which of the following technologies would be able to detect and block this traffic?

  1. Intrusion detection system

  2. Application aware firewall

  3. Stateful packet inspection

  4. Stateless packet inspection

Answer: C

Question No: 238 – (Topic 6)

A network technician has received reports of an Internet-based application that has stopped functioning. Employees reported that after updating the Internet browsers, the application began to fail. Many users rolled back the update, but this did not correct problem. Which of the following should the company do to reduce this type of action from affecting the network?

  1. Implement a disaster recovery plan with a hot site to allow users to continue working.

  2. Segment the network and create a test lab for all updates before deployment.

  3. Verify the update hashes match those on the vendor’s website.

  4. Coordinate the Internet Server update to coincide with the users’ updates.

Answer: B

Question No: 239 – (Topic 6)

A company suffers an outage due to a bad module in a core switch. Which of the following is the proper order of troubleshooting?

  1. Gather information, start at the top of the OSI model, and work down.

  2. Establish a plan of action to solve the problem.

  3. Establish a theory, identify the problem, duplicate the problem, test the theory, and repeat.

  4. Gather information, start at the bottom of the OSI model, and work up.

Answer: B

Question No: 240 – (Topic 6)

A network technician has installed and configured a new wireless router. The clients and hosts can ping each other. The WAN is a 10Gbp/s cable connection. The wired clients have fast connections. The wireless clients are slow to ping and browse the Internet. Which of the following could be the cause of the slow wireless clients?

  1. An access point experiencing RFI from florescent light bulbs

  2. A router is on the incorrect LAN

  3. A cable connection does not support wireless

  4. A high signal-to-noise ratio on the wireless network

Answer: A

100% Ensurepass Free Download!
Download Free Demo:RC0-N06 Demo PDF
100% Ensurepass Free Guaranteed!
Download 2018 EnsurePass RC0-N06 Full Exam PDF and VCE

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.