Installing and Configuring Windows Server 2012
Question No: 71 HOTSPOT – (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains a single location named Site1. The domain contains a server named Server1 that has the DHCP Server server role installed.
All client computers receive their IPv4 configurations dynamically.
The domain will expand to include a second location named Site2. A server named Server2 will be deployed to Site2. Site1 and Site2 will connect to each other by using a WAN link.
You need to ensure that the clients in both sites receive their IPv4 configurations from Server1.
In the table below, identify which actions must be performed on each server. Make only one selection in each row. Each correct selection is worth one point.
Exam Reference: 70-410: Installing and Configuring Windows Server 2012 R2, Chapter4: Deploying and configuring core network services, Objective 4.1: Configure IPv4 and IPv6 addressing, p.192, 196
Question No: 72 HOTSPOT – (Topic 1)
A printer named Printer1 is configured as shown in the exhibit. (Click the Exhibit button.)
To answer, complete each statement according to the information presented in the exhibit. Each correct selection is worth one point.
The printer is paused.
Jobs can always be permitted (even if the printer is paused, or printer not started).
Date and time that a printer can start to print a job – if the printer is limited to print at specific times. This value is expressed as the time elapsed since 12:00 AM GMT (Greenwich Mean Time).
This is sort of a trick question. As it stands, when the PowerShell script was executed, the printer is in quot;Pausedquot; status, so any submitted job will go to the queue and remain there until the status is quot;Availablequot;. As for the ability to submit a job, a user can SUBMIT the job at any time. If it is outside of the printer#39;s availability range, it will simply remain in the queue until the printer#39;s start time is reached.
Question No: 73 – (Topic 1)
Your network contains an Active Directory domain named contoso.com. All client computer accounts are in an organizational unit (OU) named AllComputers. Client computers run either Windows 7 or Windows 8.
You create a Group Policy object (GPO) named GP1. You link GP1 to the AllComputers OU.
You need to ensure that GP1 applies only to computers that have more than 8 GB of memory.
What should you configure?
The Security settings of GP1
The Block Inheritance option for AllComputers
The Security settings of AllComputers
The WMI filter for GP1
Answer: D Explanation:
Windows Management Instrumentation (WMI) filters allow you to dynamically determine the scope of Group Policy objects (GPOs) based on attributes of the target computer.
When a GPO that is linked to a WMI filter is applied on the target computer, the filter is evaluated on the target computer. If the WMI filter evaluates to false, the GPO is not applied (except if the client computer is running Windows Server, in which case the filter is ignored and the GPO is always applied). If the WMI filter evaluates to true, the GPO is applied. WMI filters, like GPOs, are stored on a per-domain basis. A WMI filter and the GPO it is linked to must be in the same domain.
Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 10:
Implementing Group Policy, p.470, 482 http://technet.microsoft.com/en-us/library/jj134176 WMI filtering using GPMC
Question No: 74 – (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.
You create a new inbound rule by using Windows Firewall with Advanced Security.
You need to configure the rule to allow Server1 to accept unsolicited inbound packets that are received through a network address translation (NAT) device on the network.
Which setting in the rule should you configure?
Remote IP address
Answer: D Explanation:
Edge traversal – This indicates whether edge traversal is enabled (Yes) or disabled (No). When edge traversal is enabled, the application, service, or port to which the rule applies is globally addressable and accessible from outside a network address translation (NAT) or edge device.
Select one of the following options from the list: Block edge traversal (default) – Prevent applications from receiving unsolicited traffic from the Internet through a NAT edge device. Allow edge traversal – Allow applications to receive unsolicited traffic directly from the Internet through a NAT edge device. Defer to user – Let the user decide whether to allow unsolicited traffic from the Internet through a NAT edge device when an application requests it. Defer to application – Let each application determine whether to allow unsolicited traffic from the Internet through a NAT edge device.
Question No: 75 – (Topic 1)
Your network contains an Active Directory forest. The forest contains a single domain named contoso.com. The domain contains four domain controllers. The domain controllers are configured as shown in the following table.
All domain controllers are DNS servers.
You plan to deploy a new domain controller named DC5 in the contoso.com domain.
You need to identify which domain controller must be online to ensure that DC5 can be promoted successfully to a domain controller.
Which domain controller should you identify?
Answer: D Explanation:
Relative ID (RID) Master:
Allocates active and standby RID pools to replica domain controllers in the same domain. (corp.contoso.com).
Must be online for newly promoted domain controllers to obtain a local RID pool that is required to advertise or when existing domain controllers have to update their current or standby RID pool allocation.
The RID master is responsible for processing RID pool requests from all domain controllers in a particular domain. When a DC creates a security principal object such as a user or group, it attaches a unique Security ID (SID) to the object. This SID consists of a domain SID (the same for all SIDs created in a domain), and a relative ID (RID) that is unique for each security principal SID created in a domain. Each DC in a domain is allocated a pool of RIDs that it is allowed to assign to the security principals it creates. When a DC’s allocated RID pool falls below a threshold, that DC issues a request for additional RIDs to the domain’s RID master. The domain RID master responds to the request by retrieving RIDs
from the domain’s unallocated RID pool and assigns them to the pool of the requesting DC At any one time, there can be only one domain controller acting as the RID master in the domain.
The Infrastructure Master – The purpose of this role is to ensure that cross-domain object references are correctly handled. For example, if you add a user from one domain to a security group from a different domain, the Infrastructure Master makes sure this is done properly. As you can guess however, if your Active Directory deployment has only a single domain, then the Infrastructure Master role does no work at all, and even in a multi-domain environment it is rarely used except when complex user administration tasks are performed, so the machine holding this role doesn’t need to have much horsepower at all.
Question No: 76 HOTSPOT – (Topic 1)
Your network contains an Active Directory domain named adatum.com. You create an account for a temporary employee named User1.
You need to ensure that User1 can log on to the domain only between 08:00 and 18:00 from a client computer named Computer1.
From which tab should you perform the configuration? To answer, select the appropriate tab in the answer area.
The User account properties contains the Logon Hours settings that you can use to change the hours that this selected object can log on to the domain. By default, domain logon is allowed 24 hours a day, 7 days a week. Note that this control does not affect the user#39;s ability to log on locally to a computer using a local computer account instead of a domain account.
To set logon hours
Open Active Directory Users and Computers.
In the console tree, click Users. Where?
Active Directory Users and Computers/domain
node/Users Or, click the folder that contains the user account.
Right-click the user account, and then click Properties.
On the Account tab, click Logon Hours, and then set the permitted or denied logon hours for the user.
Question No: 77 DRAG DROP – (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2. You need to create a new volume on Server1.
The new volume must have the following configurations:
->Be stored on a new virtual hard disk
->Be assigned the drive letter G
->Have the NTFS file system
In which order should you run the Diskpart commands?
To answer, move all the Diskpart commands from the list of commands to the answer area and arrange them in the correct order.
Box 1: create vdisk Box 2: attach vdisk Box 3: create partition Box 4: assign
Box 5: format
createvdisk file=quot;C:\vdisks\disk1.vhdquot; maximum=16000 attachvdisk
create partition primary assign letter=g
Question No: 78 – (Topic 1)
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4. Server1 is configured as shown in the following table.
You install Windows Server 2012 R2 on VM2 by using Windows Deployment Services
You need to ensure that the next time VM2 restarts, you can connect to the WDS server by using PXE.
Which virtual machine setting should you configure for VM2?
virtual Machine Chimney
The VLAN ID
The startup order
Automatic Start Action
Single-root I/O virtualization
Answer: G Explanation:
Configure the BIOS of the computer to enable PXE boot, and set the boot order so that it is booting from the network is first.
References: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3:
Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p.144 Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p.335
Question No: 79 – (Topic 1)
Your network contains multiple subnets.
On one of the subnets, you deploy a server named Server1 that runs Windows Server 2012 R2.
You install the DNS Server server role on Server1, and then you create a standard primary zone named contoso.com.
You need to ensure that client computers can resolve single-label names to IP addresses. What should you do first?
Create a reverse lookup zone.
Convert the contoso.com zone to an Active Directory-integrated zone.
Configure dynamic updates for contoso.com.
Create a GlobalNames zone.
Answer: B Explanation:
Although a GlobalNames zone is required in order to resolve single-label names, GNZs must be AD-integrated.
Since this is a standard primary zone (as opposed to an ADDS primary zone), we must first integrate the zone into Active Directory.
Exam Ref: 70-410: Installing and Configuring Windows Server 2012 R2, Chapter4: Deploying and configuring core network services, Objective 4.3: Deploy and Configure the DNS service, p.233
Question No: 80 – (Topic 1)
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has six network adapters. Two of the network adapters are connected to a network named LAN1, two of the network adapters are connected to a network named LAN2, and two of the network adapters are connected to a network named LAN3.
You create a network adapter team named Team1 from the two adapters connected to LAN1. You create a network adapter team named Team2 from the two adapters connected to LAN2.
A company policy states that all server IP addresses must be assigned by using a reserved address in DHCP.
You need to identify how many DHCP reservations you must create for Server1. How many reservations should you identify?
Answer: B Explanation:
1 for each NIC Team (2 total) and 1 for each non-teamed NIC (2 total) -gt; 4 total IP addresses are required.
100% Ensurepass Free Download!
–Download Free Demo:70-410 Demo PDF
100% Ensurepass Free Guaranteed!
–Download 2018 EnsurePass 70-410 Full Exam PDF and VCE
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|